Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
Passive Cable Splitter
RJ45 socket to 4x XLR 3-pin female
Analogue stage box that uses the 4 wire pairs and the shielding of a network cable rather than a 4-channel multicore to send 4 analogue signals from A to B.
Compatible with any shielded network cable with an RJ45 or Ethercon connector of any length
Can also be used for DMX
Dimensions: 50 x 180 x 52 mm
Weight: 450 g
Compatible with all products of the sssnake Cat Snake series
Precisávamos expandir as entradas de som desde o palco á zona de som. Apostamos neste artigo pela modularidade e simplicidade. Estamos super satisfeitos!
acabamento
0
0
Reportar a crÃtica
Reportar a crÃtica
C
boa caixa
Comand8 24.06.2022
Muito bom acabamento e robustez para aquilo que se espera de uma peça destas !
acabamento
0
0
Reportar a crÃtica
Reportar a crÃtica
M
Great solution.
M@nu81 14.04.2025
Great alternative to keep the studio clean, using only 1 Cat6 cable for four microphones.
With only three cabes across the room to the interface, I can mic que entire drums.
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
B
Great solution for audio too
Bedenella 20.12.2020
I use this with a cat6 cable running from one end to the other, it allows me to have a 4 channel stagebox bringing signals to the desk and keeping the stage clean. Tip? Replace the connectors with Neutrik, I have combo inputs so I can have both a trs and xlr input. Who needs anymore DI boxes for keyboards or playback? Not me.